Zebra ZXP 1 Series User Manual

70 Zebra ZXP Series 1 Card Printer Service Manual P1061942-001
2: Installation and Setup
Installing the Ribbon Cartridge
Step 3. Insert the ribbon cartridge with the cleaning roller facing down, so the gears on the
ends of the rollers fit into the appropriate slots.
Step 4. Close the printer lid, and push down until you hear an audible click.
Note • After the lid is closed, the ribbon automatically synchronizes when the printer
power is on.

Zebra ZXP 1 Series Specifications

General

Resolution	300 dpi
Connectivity	USB 2.0
Power Requirements	100-240 VAC, 50-60 Hz
Print Technology	Dye sublimation
Card Capacity	100 cards (input hopper)
Card Size	CR-80 ISO 7810
Dimensions	368 mm (D)
Memory	32 MB
Operating Temperature	15°C to 30°C
Operating Humidity	20% to 65% non-condensing
Card Thickness	0.3mm - 1.06mm