Zte ZXA10 C300 - Page 124

ZXA10C300CongurationManual(CLI)
InLACPmode,multiplephysicalportsaredynamicallyaggregatedintoatrunkgroup
toformalogicalport,thustobalancetheloadoftheegress/ingressowamong
thememberports.Aggregationisautomaticallygeneratedtoobtainthemaximum
bandwidth.
TheZXA10C300linkaggregationfunctioncomplieswiththefollowingrules:
lThelinkaggregationfunctionsupportsuptoeighttrunkgroups,andeachtrunkgroup
containsuptoeightmemberports.
lTheinter-interfacecardaggregationissupported,andthememberportscanbe
locatedonanyinterfacecard.
lMemberportsmustoperateinfullduplexmode,andtheworkingratesandVLAN
attributesmustbeconsistent.
ThelogicalportformedbylinkaggregationontheZXA10C300iscalledsmartgroup.
SmartgrouphasthesamedefaultVLANattributesasacommonEthernetport.
Steps
1.Inglobalcongurationmode,createasmartgroup.
ZXAN(config)#interfacesmartgroup1
ZXAN(config-smartgroup1)#
2.Congureloadbalancingmode.
ZXAN(config-smartgroup1)#smartgroupload-balancesrc-dst-mac
Note:
TheZXA10C300supportssixloadbalancingmodesthatarebasedonsource
IP ,destinationIP ,source/destinationIPs,sourceMAC,destinationMAC,
andsource/destinationMACsrespectively.Thedefaultmodeisbasedon
source/destinationMACs.
3.CongureLACPmode.
ZXAN(config-smartgroup1)#smartgroupmode802.3ad
Note:
TheZXA10C300supportstwoLACPmodes:
lOn:LACPstaticaggregationmode.
l802.3ad:LACPdynamicnegotiationmode
4.ConguretheVLANforthesmartgroup.
ZXAN(config-smartgroup1)#switchportvlan100tag
12-2
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential