Zte ZXA10 C300 - Page 125

Chapter12UplinkProtectionConguration
ZXAN(config-smartgroup1)#exit
5.ConguretheVLANforuplinkports.
ZXAN(config)#interfacegei_1/21/1
ZXAN(config-if)#switchportvlan100tag
ZXAN(config-if)#exit
ZXAN(config)#interfacegei_1/21/2
ZXAN(config-if)#switchportvlan100tag
ZXAN(config-if)#exit
6.(Optional)QueryVLANpropertiesofthesmartgroupanduplinkports.
ZXAN(config)#showvlanportsmartgroup1
PortModePvidCPvidTpid/modeTLSStatusTLSVlanProtEnPrioEn
-------------------------------------------------------------------------
hybrid>=0100x8100/PORTdisable0disabledisable
UntaggedVlan:
1
TaggedVlan:
100
ZXAN(config)#showvlanportgei_1/21/1
PortModePvidCPvidTpid/modeTLSStatusTLSVlanProtEnPrioEn
-------------------------------------------------------------------------
hybrid>=0100x8100/PORTdisable0disabledisable
UntaggedVlan:
TaggedVlan:
100
ZXAN(config)#showvlanportgei_1/21/2
PortModePvidCPvidTpid/modeTLSStatusTLSVlanProtEnPrioEn
-------------------------------------------------------------------------
hybrid>=0100x8100/PORTdisable0disabledisable
UntaggedVlan:
TaggedVlan:
100
Note:
Beforeaddingportstoasmartgroup,youneedtomakesurethattheVLAN
congurationandswitchportmodeofmemberportsshouldbeconsistentwiththe
thatofthesmartgroup.
7.Inuplinkinterfacecongurationmode,addtheporttotheaggregationgroupandset
portaggregationmodetoactive.
12-3
SJ-20130520164529-007|2013-06-30(R1.0)ZTEProprietaryandCondential