The network adapter driver is not correctly installed on the computer.
The TCP/IP settings on the computer are not correctly configured.
3.2
Logging In to the ZXHN H108N Device
This procedure introduces how to log in to the ZXHN H108N device by using the web browser.
Prerequisite
Before logging in to the ZXHN H108N device, make sure that:
The computer is correctly connected to the ZXHN H108N device.
The TCP/IP settings of the computer are configured correctly.
Context
The ZXHN H108N provides the web-based configuration mode. You can configure and manage the
device through the web browser. Different users have different configuration rights, as listed in Table
2.
Table 2 User Rights
User name: admin
Password: admin
The administrator has the privileges to configure all
the parameters in the Web configuration pages.
User name: user
Password: user
The common user can only perform the following
operation:
View the device or network information
Software upgrade
Modify the user name and password
Steps
1.
Open the Internet Explorer.
2.
Type http://192.168.1.254 in the address bar and press the Enter key. The login page is
displayed, see Figure 1.
To Next Page
Loading...
