i.
Click Click here to modify Remote Access Port of local services to open the remote
access port modification page, see Figure 40.
Figure 40 Modify Remote Access port
ii.
Click
of the service type and modify the port in the Port text box.
iii.
Click Modify.
The service control settings are configured.
The users with the specified IP addresses are permitted or denied to access the services that the
ZXHN H108N device provides.
7.6
Configuring ALG
The ZXHN H108N device supports the ALG function, which allows the system to convert the private
addresses to the public addresses in the packets for the security purpose.
This procedure introduces how to configure the ALG settings.
Context
The ALG functions allows the system to convert the private addresses to the public addresses in the
packets for the security purpose.
Steps
1.
On the navigation tree, click [Security→ ALG]. The ALG configuration page is displayed, see
Figure 41.
To Next Page
Loading...
