Zte ZXHN H108N - Configuring FTP Application

80
Steps
1. On the navigation tree, click [Application→ DMS ]. The DMS configuration page is displayed,
see Figure 60.
Figure 60 DMS
2. Enable the DMS function, and specify the place to store the media files.
Note:
By default, the media source is /mnt, that is the root directory of the USB device.
You can change the root directory to other directory of the USB storage device.
3. After the configuration, click Submit.
8.13 Configuring FTP Application
This procedure introduces how to configure the FTP application.
Prerequisite
Before configuring FTP application, make sure a USB storage device is connected to the ZXHN
H108N device.
Steps
1. On the navigation tree, click [Application→ FTP Application]. The FTP application configuration
page is displayed, see Figure 61.