Steps
1.
On the navigation tree, click [Administrator→ Login Timeout]. The login timeout configuration
page is displayed, see Figure 69.
Figure 69 Login Timeout
2.
Specify the time in the Timeout text box, and then click Submit.
The login timeout is configured. If no action is taken during the specified time, the configuration page
will be closed, and the user will be in logout status.
9.4
System Management
This section includes the following:
Managing the System
Updating Software
Managing User Configuration
Managing Default Configuration
9.4.1
Managing the System
This procedure introduces how to reboot the device or restore the factory default settings.
Steps
1.
On the navigation tree, click [Administration→ System Management→ System Management].
The system management page is displayed, see Figure 70.
To Next Page
Loading...
