Zte ZXHN H108N - DHCP Server Parameters

37
Figure 19 DHCP Server
Table 15 lists the DHCP server parameters.
Table 15 DHCP Server Parameters
Parameter
Description
LAN IP Address
IP address of the ZXHN H108N device
The device IP address should be in the same network segment as
the DHCP address pool.
Subnet Mask
Subnet mask of the device
Enable DHCP Server
Select the Enable DHCP Server check box to let the device work
as a DHCP server and assign IP addresses to the client PCs or
wireless devices.
DHCP Start IP Address
The start IP address of the DHCP address pool
DHCP End IP Address
The end IP address of the DHCP address pool
Assign IspDNS
Select this option to let the DNS provided by the ISP to assign IP
addresses to the client PCs or wireless devices.
DNS Server1 IP
Address~DNS Server3 IP
Address
IP addresses of the DNS server, provided by the ISP