Figure 84 Line Diagnosis
2.
Select the test type and VPI/VCI.
3.
Click Submit to diagnose the connection.
The network connectivity between the ZXHN H108N device and network is diagnosed.
The diagnosis result is as follows:
Number of repetitions is 1
Success count is 1 Failure
count is 0
Average response time is 1.4 ms
Minimum response time is 0.6 ms
Maximum response time is 1.9 ms
9.8.7
Diagnosing Ethernet Port
This procedure introduces how to diagnose the status of the Ethernet port.
Steps
1.
On the navigation tree, click [Administration→ Diagnosis→ Ethernet Diagnosis]. The Ethernet
diagnosis page is displayed, see Figure 85.
To Next Page
Loading...
