Figure 91 WAN Type
2.
Select a WAN type from the WAN Type drop-down list.
3.
After the configuration, click Submit.
Note:
If the WAN type is changed, the ZXHN H108N device will automatically recover to the
corresponding WAN type factory configuration.
9.10
Configuring IPv6 Switch
This procedure introduces how to switch on/off the IPv6 function.
Context
The IPv6 function of the ZXHN H108N device is enabled by default.
Steps
1.
On the navigation tree, click [Administration→ IPv6 Switch]. The IPv6 switch page is displayed,
see Figure 92.
To Next Page
Loading...
