Zte ZXHN H108N - Configuring Qos Classification

69
Steps
1. On the navigation tree, click [Application→ QoS→ Basic]. The basic QoS parameter
configuration page is displayed, see Figure 50.
Figure 50 Basic QoS Parameters
2. Select Enable QoS to enable the QoS function, and then specify other parameters.
3. Click Submit.
8.7.2 Configuring QoS Classification
This procedure introduces how to configure the QoS classification rules, including layer-2 protocol,
IP address range, and MAC address range.
Prerequisite
Before configuring QoS classification, make sure that the basic QoS configuration is completed.
Context
QoS is a network security mechanism that handles network transmission delay and congestion.
Steps
1. On the navigation tree, click [Application→ QoS→ Classification]. The QoS classification
configuration page is displayed, see Figure 51.