Figure 25 IPv6 Port Service
2.
Select the LAN interface or SSID whose DHCP function you want to disable.
3.
Click Submit.
The IPv6 DHCP function is disabled on the specified interface or SSID.
The devices that are connected to the specified LAN interface or use the SSID will not be assigned
the IPv6 addresses.
6.3.8
Configuring RA Service
This procedure introduces how to configure the RA service.
Steps
1.
On the navigation tree, click [Network→ LAN→ RA Service]. The RA service configuration page
is displayed, see Figure 26.
To Next Page
Loading...
