traceroute to 90.1.1.9 (90.1.1.9) ,40 byte packets
1 * * * Request timed out.
2 90.1.1.9 (90.1.1.9) 5 ms 4 ms 4 ms
Traceroute complete.
9.8.3
Diagnosing Simulation
Steps
1.
On the navigation tree, click [Administration→Diagnosis→Simulation]. The Simulation page
is displayed, see Figure 80.
Figure 80 Diagnosing Simulation
Table 45 lists the Diagnosing Simulation configuration parameters.
Table 45 Diagnosing Simulation parameters
Select the Simulation Type.
The type includes PPPoE and IPoE.
Enable the VLAN function.
Specify the 802.1p value to modify the service priority.
To Next Page
Loading...
