Zte ZXHN H108N - Configuring Ipv6 Port Service

42
Steps
1. On the navigation tree, choose [Network→ LAN→Prefix Delegation]. The IPv6 prefix delegation
configuration page is displayed, see Figure 24.
Figure 24 IPv6 Prefix Delegation
Table 18 describers the parameters for IPv6 prefix delegation.
Table 18 IPv6 Prefix Delegation Parameters
Parameter
Description
WAN Connection
The configured WAN connection
Delegation
Prefix delegation mode:
 RA
 DHCPV6
2. In the WAN list, click and configure the prefix delegation mode.
3. After the configuration, click Modify to update.
6.3.7 Configuring IPv6 Port Service
This procedure introduces how to disable the IPv6 DHCP service for the specified interface or SSID
when the global IPv6 DHCP function is enabled.
Prerequisite
Before configuring IPv6 port service, make sure that the global IPv6 DHCP service is enabled.
Steps
1. On the navigation tree, click [Network→ LAN→ DHCP Port Service ( IPv6 )]. The IPv6 port
service configuration page is displayed, see Figure 25.