Zte ZXHN H108N - Performing at Diagnosis

104
Parameter
Description
Username/Password
Username/Password provided by the ISP.
Authentication Type
The type includes Auto, PAP, and CHAP. By default, it is
Auto.
Retry Times
Specify the retry times.
2. Configure the Diagnosing Simulation parameters, then click Start.
The information is displayed, as show in Figure 81.
Figure 81 Simulation Result
9.8.4 Performing AT Diagnosis
This procedure introduces how to diagnose the SIM card.
Prerequisite
Before performing AT diagnosis, make sure that the 3G USB wireless card is inserted to the ZXHN
H108N device.
Steps
1. On the navigation tree, click [Administration→ Diagnosis→ AT Diagnosis]. The AT Diagnosis
page is displayed, see Figure 82.