Zte ZXHN H108N - Configuring Ipv6 DHCP Server

38
Parameter
Description
Default Gateway
It is usually the IP address of the ZXHN H108N device by default.
Lease Time
The time during which the client PCs use the IP addresses
assigned by the DHCP server
After the lease time expires, the private IP address will be
available for assigning to other network devices.
Default: 86400 seconds
2. Specify the DHCP server parameters, and then click Submit.
The DHCP server is configured.
IP addresses are automatically assigned to the user-side PCs and wireless devices that are connected
to the ZXHN H108N.
6.3.2 Configuring IPv6 DHCP Server
This procedure describes how to configure the IPv6 DHCP server to dynamically allocate IPv6
addresses to the user-side computers or wireless devices that are connected to the ZXHN H108N
device.
Steps
1. On the navigation tree, click [Network→ LAN→ DHCP Server(IPv6)]. The IPv6 DHCP server
configuration page is displayed, see Figure 20.
Figure 20 IPv6 DHCP Server
Table 16 lists the IPv6 DHCP server parameters.