Zte ZXHN H108N - Configuring Login Timeout

90
Steps
1. On the navigation tree, click [Administration→ User Management]. The user management
page is displayed, see Figure 68.
Figure 68 User Management
Table 41 lists the user management parameters.
Table 41 User Management Parameters
Parameter
Description
User Privilege
You can select Administrator or User to configure the
accounts.
Username
The user name for the administrator or user privilege.
The default user name of the administrator privilege is admin,
which cannot be modified.
Old Password
The default passwords are as follows:
 Administrator: admin
 User: user
New Password
Specify the new password.
Confirmed Password
Confirm the new password.
2. Configure the user management parameters, and then click Submit.
9.3 Configuring Login Timeout
This procedure introduces how to manage the login timeout. After the user logs in to the ZXHN H108N
device, if no operations are conducted during the specified time, the user will log off.