Figure 76 Network Mode
2.
Select one network mode, and click Submit.
Note:
The ZXHN H108N device only supports WCDMA 3G card for the moment. If the network mode
is changed, it is necessary to unplug the card and plug it again to make the change come into
effect.
9.7
Configuring Uplink Backup
ZXHN H108N supports DSL connection and 3G connection. When both DSL line and 3G card are
available, DSL connection works as the primary uplink connection, and 3G connection works as the
secondary uplink connections. If the DSL line fails to work, the 3G card works. When the DSL line
resumes working, the 3G card automatically stops working.
This procedure introduces how to configure the switchover time between the primary connection and
secondary connection.
Steps
1.
On the navigation tree, click [Administration→Uplink Backup]. The uplink backup page is
displayed, see Figure 77.
To Next Page
Loading...
