Zte ZXHN H108N - Configuring 3 G WAN Connection; 3 G WAN Connection Parameters

23
6.1.2 Configuring 3G WAN Connection
The ZXHN H108N device supports 3G WAN connection by using the 3G USB network card. This
procedure introduces how to configure the 3G WAN connection
Context
The ZXHN H108N device supports 3G WAN connection by using the 3G USB network card.
The ZXHN H108N supports eight WAN connections at most.
Steps
1. On the navigation tree, click [Network→ WAN→ 3G Connection]. The 3G WAN connection
configuration page is displayed, as shown in Figure 7.
Figure 7 3G WAN Connection
Table 7 describes the parameters for creating a new 3G WAN connection.
Table 7 3G WAN Connection Parameters
Parameter
Description
Connection Name
3G WAN connection name
Enable NAT
When multiple computers in a LAN share one IP address to
access the Internet, NAT is used to transfer the private network
address to the public network address of the WAN port.