Figure 33 IPv6 Policy Routing 
 
 
 
Table 23 lists the parameters for IPv6 policy routing configuration. 
 
Table 23 Parameters for Policy Routing Configuration 
 
Determined by the carrier 
Destination IPv6 IP address 
The protocol includes the following: 
 
   TCP 
 
   UDP 
 
   ANY 
 
2. 
Select an interface from the Destination Interface drop-down list, and specify the routing policy 
as required. 
3. 
Click Add. 
 
The IPv6 policy routing rule is configured. The packets will be forwarded based on the policy routing. 
 
 
6.5.4 
Displaying IPv6 Routing Table 
This procedure introduces how to display the IPv6 routing table.