Zte ZXHN H108N - Diagnosing Line

106
Figure 83 Mirror Configuration
Table 46 lists the mirror configuration parameters.
Table 46 Mirror Configuration Parameters
Parameter
Description
Source
Network-side WAN interface
Destination
User-side LAN interface
Enable
Enable the port mirror function.
2. Configure the mirror parameters, and then click Add.
9.8.6 Diagnosing Line
This procedure introduces how to verify that the Modem of ADSL WAN connection is properly
connected to the network.
Prerequisite
The ADSL WAN connection is created.
Steps
1. On the navigation tree, click [Administration→ Diagnosis→ Line Diagnosis]. The line
diagnosis page is displayed, see Figure 84.