Zte ZXHN H108N - 6 In4 Tunnel Connection Parameter

26
Prerequisite
The IPv4 WAN connection has been created.
Steps
1. On the navigation tree, click [Network→ WAN→6in4 Tunnel Connection]. The 6in4 tunnel
connection is displayed, see Figure 9.
Figure 9 6in4 Tunnel Connection
Table 9 lists the parameters for 6in4 tunnel connection.
Table 9 6in4 Tunnel Connection Parameter
Parameter
Description
Tunnel Name
The default is Create Tunnel. Before creating a
new tunnel name, make sure the Create Tunnel
option is selected.
New Tunnel Name
Specify the new tunnel name.
WAN Connection
Select the IPv4 WAN connection.
MTU
MTU size of the tunnel
6in4 Tunnel Type
There are two 6in4 tunnel types:
 Manual Tunnel
 6rd
Tunnel Remote Address
Specify the tunnel remote address when the
Manual Tunnel option is selected for the 6in4
Tunnel Type.
6in4 Tunnel Configuration
The 6in4 Tunnel Configuration includes:
 Static
 Auto