Zte ZXHN H108N - Configuring DNS; Qos; Configuring Basic Qos Parameters

68
3. Click Add.
8.6.3 Configuring DNS
This procedure introduces how to configure the DNS server IP address.
Steps
1. On the navigation tree, click [Application→ DNS Service→ DNS]. The DNS configuration page
is displayed, see Figure 49.
Figure 49 DNS
2. Type the IP address of the DNS server assigned by the ISP.
3. Click Submit.
8.7 QoS
This section includes the following:
 Configuring Basic QoS Parameters
 Configuring QoS Classification
 Conducting Queue Management
 Configuring Committed Access Rate
8.7.1 Configuring Basic QoS Parameters
This procedure introduces how to configure the basic QoS parameters.