Specify the IPv4 Masklen.
2.
Specify the parameters according to the request, and click Create.
6.1.5
Configuring Port Binding
This procedure introduces how to configure port binding. The port binding function is used to bind
the LAN-side port with the WAN connection.
Steps
1.
On the navigation tree, click [Network→ WAN→ Port Binding]. The port binding configuration
page is displayed, see Figure 10.
Figure 10 Port Binding
2.
Select a WAN connection type from the WAN Connection drop-down list, and select the LAN
port or SSID that you want to bind.
3.
After the configuration, click Submit.
6.1.6
Configuring ADSL Modulation
This procedure introduces how to configure the ADSL modulation type.
Steps
1.
On the navigation tree, click [Network→ WAN→ ADSL Modulation]. The ADSL modulation
configuration page is displayed, see Figure 11.
To Next Page
Loading...
