Zte ZXHN H108N - Displaying Upnp Port Mapping; Upnp Parameters

64
Table 31 UPnP Parameters
Parameter
Description
Enable
Select this option to enable the UPnP function.
WAN Connection
WAN connection
Advertisement Period (in
minutes)
Time period that the UPnP device sends an announcement
packet
If the UPnP device does not send any announcement packets
during this period, it indicates that the device is invalid.
By default, the period is 30 minutes.
Advertisement Time To Live (in
hops)
The TTL (Time to live ) for the advertisement. The
advertisement will be abandoned after it has been transferred
for the specified times by the routers. The default value is 4.
2. Configure the UPnP parameters, and then cick Submit.
8.4 Displaying UPnP Port Mapping
This procedure introduces how to display the UPnP port mapping information, including the protocol,
port, and IP address.
Steps
1. On the navigation tree, click [Application→ UPnP Port Mapping]. The UPnP port mapping page
is displayed, see Figure 45.
Figure 45 UPnP Port Mapping
Note:
Protocol, Int.Port, Ext.Port and IP Address are configured by external tool.
2. (Optional) Click Refresh to display the latest information.