Zte ZXHN H108N - Configuring IGMP Basic Parameters

75
 Configuring IGMP Basic Parameters
8.9.1 Configuring WAN Connection
This procedure introduces how to configure the WAN connection for IGMP function.
Prerequisite
Before configuring WAN connection, make sure that the WAN connection configuration is complete.
Steps
1. On the navigation tree, click [Application→ IGMP→ WAN Connection]. The WAN connection
configuration page is displayed, see Figure 55.
Figure 55 IGMP WAN Connection
2. Select a WAN connection from the WAN Connection drop-down list.
3. Click Add.
8.9.2 Configuring IGMP Basic Parameters
This procedure introduces how to enable the basic IGMP function.
Steps
1. On the navigation tree, click [Application→ IGMP→ Basic Configuration]. The IGMP basic
configuration page is displayed, see Figure 56.