Zte ZXHN H108N - Conducting Queue Management

71
Parameter
Description
802.1p
Range: 0~7
Destination Port MIN/MAX
Destination port range
DSCP
Range: 0~63
Source IP address MIN/MAX
Source IP address range
Destination IP address
MIN/MAX
Destination IP address range
TOS
Range: 0~255
IP Precedence
Range: 0~7
Source IPv6 Address MIN/MAX
Source IPv6 address range
Destination IPv6 Address
MIN/MAX
Destination IPv6 address range
Traffic Class
Range: 0~255
Flow Label
Range: 0~1048575
802.1p Re-marking
802.1P identifier value
Range: 0~7
DSCP Re-marking
DSCP identifier
Range: 0~63
CAR Index
CAR index
Queue Index
QoS rule number
Range: 1~8
2. Configure the QoS classification parameters, and then click Add.
8.7.3 Conducting Queue Mangement
This procedure introduces how to configure the QoS queue management parameters, including the
priority, algorithm, and weight.
Prerequisite
Before managing queue index, make sure that:
 The basic QoS configuration is completed.
 The queue management function is enabled.
Steps
1. On the navigation tree, click [Application→ QoS→ Queue Management]. The queue
management page is displayed, see Figure 52.