Zte ZXHN H108N - Appendix B Standard Compliance

20
Parameter
Description
VPI/VCI
Channel number of the ATM cell
Each ADSL port has eight PVCs, which can be configured with
different VPIs and VCIs. This should be consistent with the
port configuration on the NE.
New VPI/VCI
Create a VPI/VCI.
Encapsulation Type
Encapsulation type of the IP packets
By default, it is LLC.
Service Type
Define the bit rate.
Enable VLAN
Enable the VLAN function.
VLAN ID
VLAN ID
802.1p
Specify the 802.1p value to modify the service priority.
Range: 0~7
Type
Connection type
 Route
 Bridge Connection
Enable DSCP
This function is used together with the QoS function.
DSCP
Range: 0~63
MTU
Define the maximum transfer unit.
Link Type
There are two link types:
 PPP
 IP
Username
PPP user name provided by the ISP
Password
PPP password provided by the ISP
Authentication Type
The type includes Auto, PAP, and CHAP. By default, it is Auto.
Connection Trigger
There are three connection trigger modes:
 Always On: The device will automatically dial up after the de-
vice is powered ON or the WAN connection is disconnected.
 On Demand: The device will dial up if there are data trans-
mission requests and the WAN connection will be automati-
cally disconnected after the WAN connection is idle for some
time.
 Manual: The user manually dials up