Chapter 8 Broadband
VMG/EMG/AM/DM/GM Series User’s Guide
199
Figure 98 Network Setting > Broadband > Cellular Backup (Budget Setup)
The following table describes the labels in this screen.
Table 39 Network Setting > Broadband > Cellular Backup
LABEL DESCRIPTION
General
Cellular Backup Click this switch to enable Cellular Backup to have the Zyxel Device use the cellular connection
as your WAN or a backup when the wired WAN connection fails.
Ping Check Click this switch to ping check the connection status of your WAN.
You can configure the frequency of the ping check and number of consecutive failures before
triggering cellular backup.
Check Cycle Enter the frequency of the ping check in this field.
Consecutive Fail Enter how many consecutive failures are required before cellular backup is triggered.
Ping Default
Gateway
Select this to have the Zyxel Device ping the WAN interface’s default gateway IP address.
Ping the Host Select this to have the Zyxel Device ping the particular host name or IP address you entered in
this field.
Cellular Connection Settings
To Next Page
Loading...
