Chapter 9 Wireless
VMG/EMG/AM/DM/GM Series User’s Guide
219
Note: If upstream/downstream bandwidth is empty, the Zyxel Device sets the value
automatically. Setting a maximum upstream/downstream bandwidth will significantly
decrease WiFi performance.
Click the Edit icon next to an SSID in the Guest/More AP screen. The following screen displays.
Figure 106 Network Setting > Wireless > Guest/More AP > Edit
The following table describes the fields in this screen.
Table 48 Network Setting > Wireless > Guest/More AP > Edit
LABEL DESCRIPTION
WiFi/Wireless Network Setup
WiFi/Wireless Click this switch to enable or disable the WiFi in this field. When the switch turns blue , the
function is enabled; otherwise, it is not.
To Next Page
Loading...
