ABB AC 800M

Configuration Error Appendix B Troubleshooting CI873 Log Entries
254 9ARD000014-600 A
12 The data to be
transmitted in the
response buffer is
larger than the
allocated response
buffer
Data sent to the device is more
than what is expected.Check
the EDS file for the
correctness.
EtherNet/IP
13 The service did not
supply enough data to
perform the specified
operation
the configuration request sent
to the device is
incomplete.Check the EDS file
for correctness.
EtherNet/IP/DeviceNet
14 The attribute
specified in the
request is not
supported
Check the EDS file if right
version is been used.
EtherNet/IP/DeviceNet
15 The service supplied
more data than was
expected
Data sent to the device is more
than what is expected. Check
the EDS file for the
correctness.
EtherNet/IP/DeviceNet
16 The object specified
does not exist in the
device
Check the EDS file if right
version is been used.
EtherNet/IP/DeviceNet
17 The attribute data of
this object was not
saved prior to the
requested service
Certain parameters have to be
saved in ROM after
configuration, so that it can be
automatically configured
during power failure condition.
Check the EDS file if the
option to save the parameter is
provided.
EtherNet/IP/DeviceNet
Table 43. Configuration Error (Continued)
Sl
No
Message in CI873 Log Description
Applicability based on
device classification