I/O Settings Section 3 Device Import Wizard
80 9ARD000014-600 A
The I/O Settings window for EtherNet/IP device displays the connections listed
under the product name/ catalog number in a tree view, on the left pane, as shown in
Figure 30. One or more of the following connections are listed:
• Exclusive Owner - If a connection has an application type of exclusive owner,
it shall not be dependent on any other connection for its existence. This
requirement exists to signal the originator of the exclusive owner connection
that the O=>T data is no longer being received by the target device.
Figure 30. Ethernet/IP Modular I/O system
To Next Page
Loading...
