1 Mounting points (6 pieces: 2 at the top, 2
at the bottom of the main part of the
frame, 2 at the top of the cable box)
2Cover
3 Cable/conduit box
4 Cover screws (2 pieces)
5 Control panel
6 Control panel connection
7 Cold configuration connection for CCA-01
8 Power OK and Fault LEDs. See section
LEDs on page 156.
9 I/O connections. See section External
control connection terminals, frames
R1…R5 on page 35.
10 Varistor grounding screw (VAR).
See Checking the compatibility with IT
(ungrounded) and corner-grounded TN
systems on page 91.
11 Two EMC filter grounding screws (EMC).
See Checking the compatibility with IT
(ungrounded) and corner-grounded TN
systems on page 91.
12 Input power connection (L1, L2, L3),
motor connection (T1/U, T2/V, T3/W) and
DC connection (UDC+, UDC-) under the
shroud
13 PE connection (power line)
14 Grounding connection (motor)
15 Cable box plate
16 Cable entry
17 Main cooling fan
18 Cable tie mounts for I/O cables
2
3
R5 IP21
1
5
1
1
11
10
11
5
6
7
4
9
9
12
PE
13
14
16
18
18
15
17
To Next Page
Loading...
