1 Mounting points (6 pieces: 2 at the top, 2
at the bottom of the main part of the
frame, 2 at the top of the cable box)
2 Cover
3 Cable/conduit box
4Heatsink
5 Lifting holes (6 pieces)
6 Control panel
7 Control panel connection
8 Cold configuration connection for CCA-01
9 Power OK and Fault LEDs. See section
LEDs on page 156.
10 I/O connections. See section External
control connection terminals, frames
R6…R9 on page 36.
11 Cable tie mounts for I/O cables
12 Clamps for I/O cable mechanical support
13 Varistor grounding screw (VAR), under
the control panel platform
14 Two EMC filter grounding screws (EMC),
one under the control panel platform and
one at the left, above the shroud.
See Checking the compatibility with IT
(ungrounded) and corner-grounded TN
systems on page 91.
15 Shroud. Under the shroud: Input power
connection (L1, L2, L3), motor connection
(T1/U, T2/V, T3/W) and DC connection
(UDC+, UDC-).
16 PE connection (power line)
17 Grounding connection (motor)
18 Cable entry
19 Main cooling fan
20 Auxiliary cooling fan
R6 IP21
1
5
2
4
3
5
6
7
8
9
10
9
13
14
20
18
15
12
12
16
11
1
19
14
5
PE
17
To Next Page
Loading...
