ABB IRB 5720 - Page 258

NoteAction
xx2100002168
Remove the turning disc.2
Refitting the turning disc
Use these procedures to refit the turning disc.
Refitting the turning disc
NoteAction
Wipe clean the contact surfaces.1
Rust preventive: 3HAC034903-001
( Mercasol 3110 Waxcoat. Recom-
mended drying time is 24h.)
xx2100002232
Protection type Foundry Plus:
Apply rust preventive to the surface shown in the
figure.
2
Continues on next page
258 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.6.2 Replacing the turning disc
Continued