NoteAction
xx2000000415
Cut the cable tie at the eyelet on top of the
arm house.
4
xx2100001285
Remove the metal clamp on top of the arm
house.
5
Removing the cable harness - upper arm and wrist
These procedures describe how to remove the cable harness in the upper arm and
wrist.
Retrieving access to the wrist cabling
Use this procedure to remove the wrist cover.
NoteAction
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
1
Continues on next page
262 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.7.1 Removing the cable harness
Continued
To Next Page
Loading...
