Inverted robot: Attaching the motor lifting accessory
Note
This procedure is valid for inverted robots.
NoteAction
Lifting accessory, motor (inverted
robot): 3HAC081586-001
xx2100002807
Lower the revolving handle on the lifting access-
ory, to be able to fit the shelf beneath the motor
while fastening the tool.
1
xx2100002808
Secure the tool to the robot frame with the attach-
ment screws.
2
Screw the revolving handle to lift and fit the shelf
against the motor.
3
Inverted robot: Removing the axis-1 motor
Note
This procedure is valid for inverted robots.
Continues on next page
326 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.8.1 Replacing the axis-1 motor
Continued
To Next Page
Loading...
