ABB OmniCore C90XT - Installing the Power Supply Optional Device

3.7.4 Installing the power supply optional device
Location
The illustration shows the location of the power supply optional device in the
controller.
xx2000000447
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC30353HAC071301-001Power supply
DSQC 6093HAC14178-1DSQC 609 power supply
DSQC 6343HAC13398-2DSQC 634 power supply
3HAC069617-001Harness AC input of power supply
3HAB7983-1End clamp
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
116 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.7.4 Installing the power supply optional device