ABB OmniCore C90XT - Replacing the Drive Unit

5.2.11 Replacing the drive unit
Location
The illustration shows the location of the drive unit in the controller.
xx1900001471
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC30413HAC063913-001Drive
Harness A1.X4 - T4.X53HAC063344-001Harness DC-BUS
Harness A1.X5 - T4.X13HAC064389-001Harness 24_SYS_DRV
Harness T4.X3 - A1.X123HAC059894-001Harness EtherCAT
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
Product manual - OmniCore C90XT 257
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.11 Replacing the drive unit