ABB OmniCore C90XT User Manual

5.3.5 Replacing the HMI signal (FlexPendant) connector
Location
The illustration shows the location of the HMI signal connector in the controller.
xx1900001475
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Harness-TPU3HAC069673-001Harness TPU connection
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
306 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.5 Replacing the HMI signal (FlexPendant) connector

ABB OmniCore C90XT Specifications

General

Brand	ABB
Model	OmniCore C90XT
Category	Robotics
Language	English