ABB OmniCore C90XT - Replacing the Motor Connector

5.3.2 Replacing the motor connector
Location
The illustration shows the location of the motor connector in the controller.
xx1900001478
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC069672-001Harness Motors power LV 6-axis
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
292 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.2 Replacing the motor connector