ABB OmniCore C90XT - Replacing the Conveyor Tracking Module(CTM)

5.2.13 Replacing the conveyor tracking module(CTM)
Location
The illustration shows the location of the conveyor tracking module in the controller.
xx1900001472
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
DSQC20003HNA027579-001Conveyor tracking module [3103-
1]
3HNA029345-001CONNECTOR KIT - DSQC2000
Power cable of CTM3HAC069618-001Harness 24V_CTM
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
Product manual - OmniCore C90XT 279
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.2.13 Replacing the conveyor tracking module(CTM)