5.3.2.1 Replacing the motor connector
Removing the motor connector
Preparations
Note/IllustrationAction
DANGER
Before doing any work inside the cabinet,
disconnect the mains power. For more
information, see Electrical safety on
page 31.
1
Opening the door on page 174.Open the door.2
Location of wrist strap button:
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
3
xx1900001446
Removing the motor connector
Note/IllustrationAction
Disconnect the following connectors for
the motor connector:
• T4.X7, T4.X8, T4.X9
• X1 - K2.X7 & X22
• PE.5 & PE.6
1
Continues on next page
294 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.2.1 Replacing the motor connector
To Next Page
Loading...
