ABB OmniCore C90XT - Replacing the Fasten Strip

5.4.3 Replacing the fasten strip
Location
The illustration shows the location of the fasten strip on the FlexPendant.
xx1900000771
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC065419-001Fasten strip
Replacing the fasten strip
Note/IllustrationAction
Open the velcro on the fasten strip.1
Take the fasten strip out from the holes.2
Insert the new fasten strip into the holes
one by one.
3
Secure the velcro in a suitable length.4
Product manual - OmniCore C90XT 349
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.4.3 Replacing the fasten strip