7.2 Troubleshooting fault symptoms
Fault symptoms described in this manual
This manual describes how to troubleshoot the following fault symptoms:
• No LEDs are lit on the controller on page 358
• Start-up failure on page 361
• Problem releasing the robot brakes on page 365
• Problem starting or connecting the FlexPendant on page 369
• Problem using the joystick on page 373
• Controller fails to start on page 374
• Reflashing firmware failure on page 375
• Inconsistent path accuracy on page 376
Continues on next page
Product manual - OmniCore C90XT 357
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
7 Troubleshooting
7.2 Troubleshooting fault symptoms
To Next Page
Loading...
