Check:
• all connections to the replaced part
• power supplies
• that the correct part has been fitted
• the last repair documents.
The robot has recently
been repaired
Check:
• software versions
• compatibilities between hardware and software
• options and their configuration
The robot recently had a
software upgrade
Check:
• connections
• software versions
The robot has recently
been moved from one site
to another (an already
working robot)
356 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
7 Troubleshooting
7.1 Introduction to troubleshooting
Continued
To Next Page