ABB OmniCore C90XT - Fitting the Connector

3.5.4 Fitting the connector
General
This section describes how to manufacture a cable for connecting the main power
to the controller.
xx1900001461
Detailed view
A
B
C
D
xx1900001457
Description
Female insert, quick lockA
Angle hood M20B
Cable gland M20C
Sealing screwD
Continues on next page
70 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
3 Installation and commissioning
3.5.4 Fitting the connector