5.3.4 Replacing the power inlet
Location
The illustration shows the location of the power inlet in the controller.
xx1900001479
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Harness-Mains connection3HAC067661-001Harness AC input with SW
3HAC070308-001Connector AC power inlet
3HAC037699-001Handle for 6 mm switch
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit for controller on
page 417.
-Standard toolkit
-ESD protective wrist band
Continues on next page
302 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.4 Replacing the power inlet
To Next Page
Loading...
