Note/IllustrationAction
ELECTROSTATIC DISCHARGE
(ESD)
The unit is sensitive to ESD. Before
handling the unit read the safety inform-
ation in section The unit is sensitive to
ESD on page 43.
2
xx1900001917
Insert the fieldbus adapter slave tighten
the screws.
3
Closing the door on page 174.Close the door.4
Perform the function tests to verify that
the safety features work properly, see
Function tests on page 165
5
Product manual - OmniCore C90XT 301
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.3 Replacing the fieldbus adapter slave
Continued
To Next Page
Loading...
