ABB OmniCore C90XT - 5.3 Replacing parts on the panels

5.3 Replacing parts on the panels
5.3.1 Replacing the manipulator signal connector (SMB)
Location
The illustration shows the location of the manipulator signal connector.
xx1900001476
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the OmniCore C90XT via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
Harness single SMB3HAC069674-001Harness Single SMB connection
Harness double SMB3HAC069675-001Harness Double SMB connection
Continues on next page
288 Product manual - OmniCore C90XT
3HAC073706-001 Revision: D
© Copyright 2020-2021 ABB. All rights reserved.
5 Repair
5.3.1 Replacing the manipulator signal connector (SMB)